Hydraulic Winch
Hydraulic Winch
Bison 20
- Part number: PN 682030 (Std. drum) / PN 682169 (Long drum)
- Rated line pull: 9,070 kg / 20,000 lb (SAE J706 & EN 14492-1 rating)
- Line speed (at 1st layer of rope) : 7.1 mpm at 60 l/min (23 fpm at 15.9 g/min)
- Operation pressure: 175 bar / 2,540 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 155.7 cm3/rev (9.5 in3/rev)
- Gear ratio: 2-stage planetary gear 30:1
- Winch construction: Cast housings with steel drum
- Clutch (Freespooling): Output shaft disengaged
- Brake: Multi-Disc Brake (MDB) patented and counterbalance valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 146 mm (5.8″)
- Drum flange diameter: 314 mm (12.4”)
- Distance between flanges:
203 mm (8″) – Std. drum
355.6 mm (14″) – Long drum - Mounting bolt pattern:
190.5 x 304.8 mm (7.5” x 12”) ; 266.7 x 304.8 mm (10.5” x 12”) – Std. drum
190.5 x 457.2 mm (7.5” x 18”) ; 266.7 x 457.2 mmc (10.5” x 18”) – Long drum - Wire rope recommended:
14 mm x 43 m (9/16” x 141’) – Std. drum
14 mm x 80 m (9/16” x 262’ ) – Long drum
1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 137 kN (30,742 lbf) required for SAE J706 ratings
16 mm x 30 m (5/8” x 98’) – Std. drum
16 mm x 55 m (5/8” x 180’ ) – Long drum
1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 179 kN (40,167 lbf) required for EN 14492-1 ratings - Winch weight:
135 kg / 298 lb – Std. drum
150 kg / 331 lb – Long drum - Gross weight:
165 kg / 364 lb – Std drum
195 kg / 430 lb – Long drum - Box dimension, (L x D x H) :
870 x 500 x 510 mm (34.3″ x 19.7″ x 20.1″) – Std. drum
1,025 x 500 x 510 mm (40.4″ x 19.7″ x 20.1″) – Long drum
Bison 30
- Part number: PN 683030 (Std. drum) / PN 683352 (Long drum)
- Rated line pull: 13,600 kg / 30,000 lb (SAE J706 rating)
- Line speed (at 1st layer of rope) : 5 mpm at 60 l/min (16 fpm at 15.9 g/min)
- Operation pressure: 175 bar / 2,540 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 155.7 cm3/rev (9.5 in3/rev)
- Gear ratio: 2-stage planetary gear 41:1
- Winch construction: Cast housings with steel drum
- Clutch (Freespooling): Output shaft disengaged
- Brake: Multi-Disc Brake (MDB) patented and counterbalance valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 152.5 mm (6″)
- Drum flange diameter: 343 mm (13.5”)
- Distance between flanges:
203 mm (8″) – Std. drum
355.6 mm (14″) – Long drum - Mounting bolt pattern:
190.5 x 304.8 mm (7.5” x 12”) ; 266.7 x 304.8 mm (10.5” x 12”) – Std. drum
190.5 x 457.2 mm (7.5” x 18”) ; 266.7 x 457.2 mm (10.5” x 18”) – Long drum - Wire rope recommended:
16 mm x 43 m ( 5/8” x 141’) – Std. drum
16 mm x 75 m ( 5/8” x 246’ ) – Long drum
1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 179 kN (40,167 lbf) required for SAE J706 ratings - Winch weight:
175 kg / 386 lb – Std. drum
197 kg / 434 lb – Long drum - Gross weight:
198 kg / 437 lb – Std drum
235 kg / 518 lb – Long drum - Box dimension, (L x D x H) :
900 x 510 x 530 mm (35.4″ x 20.1″ x 20.9″) – Std. drum
1,040 x 620 x 510 mm (40.9″ x 24.4″ x 20.1″) – Long drum
Bison 50
- Part number: PN 685010 (Std. drum)
- Rated line pull: 22,680 kg / 50,000 lb (SAE J706 rating)
- Line speed (at 1st layer of rope) : 5.7 mpm at 100 l/min (19 fpm at 26.5 g/min)
- Operation pressure: 200 bar / 2,900 psi
- Max oil flow: 100 l/min (26.5 g/min)
- Hydraulic motor: 251.8 cm3/rev (15.4 in3/rev)
- Gear ratio: 2-stage planetary gear 44:1
- Winch construction: Cast housings with steel drum
- Clutch (Freespooling): Output shaft disengaged
- Brake: Multi-Disc Brake (MDB) patented and counterbalance valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 180 mm (7.1″)
- Drum flange diameter: 406 mm (16”)
- Distance between flanges: 368 mm (14.5″)
- Mounting bolt pattern: 240 x 453 mm (13.4” x 17.8”) ; 340 x 453 mm (13.4” x 17.8″)
- Wire rope recommended:
22.4 mm x 48 m (7/8” x 157’) 1,770 N/mm2 (EIPS) breaking strength of 305 kN (68,442 lbf) required for SAE J706 ratings - Winch weight: 375 kg / 827 lb
- Gross weight: 410 kg / 904 lb
- Box dimension, (L x D x H) : 1,170 x 630 x 670 mm (46″ x 24.8″ x 26.4″)
HV-10
- Part number: PN 682546 (Std. drum) / PN 683129 (Std. drum – Clutch in left side)
- Rated line pull: 4,535 kg / 10,000 lb (SAE J706 rating)
4,300 kg (EN 14492-1 rating) - Line speed (at 1st layer of rope) : 14 mpm at 60 l/min (46 fpm at 15.9 g/min)
- Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 97.3 cm3/rev (5.9 in3/rev)
- Gear ratio: 2-stage planetary gear 16:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 102 mm (4″)
- Drum flange diameter: 201.5 mm (7.9”)
- Distance between flanges: 253 mm (10″)
- Mounting bolt pattern: 291.6 x 171.2 mm (11.5” x 6.7”)
374.2 x 114 mm (14.7” x 4.5”) - Wire rope recommended:
11 mm x 27 m (7/16″ x 89′), 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 84.4 kN (18,939 lbf) required for SAE J706 and EN 14492-1 ratings. - Winch weight: 37 kg / 81.4 lb
- Gross weight: 46.6 kg / 102.5 lb
- Box dimension, (L x D x H) : 680 x 380 x 300 mm (26.8″ x 15″ x 11.8″)
Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.
* Drum freeboard shall be at least 1.5 x rope diameter
HV-12
- Part number: PN 684311 (Std. drum) / PN 685433 (Std. drum – Clutch in left side)
- Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating)
5.100 kg (EN 14492-1 rating) - Line speed (at 1st layer of rope) : 10 mpm at 60 l/min (33 fpm at 15.9 g/min)
- Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 125 cm3/rev (7.6 in3/rev)
- Gear ratio: 2-stage planetary gear 19.4:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 114.3 mm (4.5″)
- Drum flange diameter: 252 mm (9.9”)
- Distance between flanges: 255 mm (10″)
- Mounting bolt pattern: 303.5 x 114.3 mm (12” x 4.5”)
368.5 x 171.2 mm (14.5” x 6.7”) - Wire rope recommended: 12 mm x 39 m (1/2″ x 128′), 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 100.5 kN (22,552 lbf) required for SAE J706 and EN 14492-1 ratings
- Winch weight: 71 kg / 156.5 lb
- Gross weight: 87 kg / 191.8 lb
- Box dimension, (L x D x H) : 735 x 430 x 335 mm (29″ x 16.9″ x 13.2″)
Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.
* Drum freeboard shall be at least 1.5 x rope diameter
HV-15
- Part number: PN 686732 (Std. drum) / PN 687548 (Std. drum – Clutch in left side)
- Rated line pull: 6,800 kg / 15,000 lb (EN 14492-1 rating & SAE J706 rating)
- Line speed (at 1st layer of rope) : 9 mpm at 60 l/min (30 fpm at 15.9 g/min)
- Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 156 cm3/rev (9.5 in3/rev)
- Gear ratio: 2-stage planetary gear 19.4:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 127 mm (5″)
- Drum flange diameter: 252 mm (9.9”)
- Distance between flanges: 255 mm (10″)
- Mounting bolt pattern:
303.5 x 114.3 mm (12” x 4.5”)
368.5 x 171.2 mm (14.5” x 6.7”) - Wire rope recommended:
14 mm x 27 m (9/16″ x 89′) 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 137 kN (30,742 lbf) required for SAE J706 and EN 14492-1 ratings - Winch weight: 72 kg / 158.7 lb
- Gross weight: 88 kg / 194 lb
- Box dimension, (L x D x H) : 735 x 430 x 335 mm (29″ x 16.9″ x 13.2″)
Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.
* Drum freeboard shall be at least 1.5 x rope diameter